Hangar Assembly Manual

Select a section title to view the associated PDF document

• Introduction (67k)
• Tools Required (77k)
• Workstation (80k)
• Hangar Site Selection/Tail And Wing Post Location (72k)
• Figure 1 Hangar Perimeter Clearance (19k)
• Figure 2 Hangar Footprint Dimensions (19k)
• Figure 3 Tail And Wing Post Location (20k)
• Setting The Tail And Wing Anchors (338k)
• Setting The Tail And Wing Posts (185k)
• Assembling The Wing And Tail Trusses/Painting the Truss (332k)
• Setting The Tail And Wing Trusses On The Posts (337k)
• Setting Up The Wall Panels (732k)
• Wall Panels To Truss Attachment (263k)
• Installing Anchor Stakes (208k)
• Installing Electrical System (280k)
• Forming and Cutting The Tail House To Wing House Corner Paneling (121k)
• Installing the Closure Stripping (274k)
• Installing Siding/Installing the Winghouse Trailing Edge Siding (145k)
• Installing Wingtip Siding (132k)
• Installing the Tailhouse Siding (425k)
• Wooden Wheel Channel (161k)
• Gravel Floor (166k)
• Installing Panel 1 and 2 On Tailhouse (160k)
• Installing Tailhouse Roof (477k)
• Installing the Roof on Winghouses (447k)
• Installing Hinged Nose Door Panel (183k)
• Installing Hinged Wing Door Panels (372k)
• Attaching the Nosehouse (391k)
• Cutting and Forming the Nose Hinge/Nosehouse Corner Pieces (72k)
• Cutting the Four 10’ Corner Pieces (219k)
• Installing Siding on Nosehouse and Center Hinge Panel/Covering the Winghouse Doors (408k)
• Winch Cable Hookup (151k)
• Test and Adjust the Nosehouse Door (354k)
• Attaching the Wingdoor Draglinks (282k)
• Attaching the Corner Pieces (146k)
• Installing Fascia (218k)
• Installing Carpeting (150k)